Low console
A single grounded run beneath a wall-mounted screen — closed storage, a clean top line, and the least visual weight.
It holds a black rectangle, four boxes and a nest of cable, and it still has to be the best-looking wall in the room. That's a storage problem pretending to be a styling one.
Not the showroom. Measure from the seat back to the wall, set the screen centre near seated eye level — around 42 to 45 inches — and the whole wall follows from there.
Screen centre off floor
Cables left on show
Cabinetry warranty
Cables you'll never
see again.
A media wall is a storage problem pretending to be a styling one. Get these six right and the black rectangle stops being the first thing you notice when you walk in.
Conduit runs
Chased before plaster
The routes for power and signal are cut into the wall at civil stage, so not a single lead ends up surface-run or boxed in later.
Wall anchoring
Fixed to hold the screen
A large screen and a loaded unit are real weight. We anchor into masonry or a braced backing, not bare plasterboard, so nothing works loose.
Heat dissipation
Warm air let out
Amplifiers and set-top boxes throw heat. Enclosed bays get a vent path so the electronics run cool instead of cooking behind a shutter.
Line of sight
IR reaches the box
A remote has to see its box. We keep an IR-friendly front or route a repeater, so a closed cabinet doesn't kill the controls.
Power & data
Points at the mount
Sockets and a network point land exactly behind the screen and inside the unit, planned in before the wall ever closes.
Recess depth
Wall built out for the mount
A flush screen needs the bracket and cables to sit inside the wall line; we build the depth in so the panel sits tight, not proud.
A single grounded run beneath a wall-mounted screen — closed storage, a clean top line, and the least visual weight.
Floor-to-ceiling panelling with the screen recessed, backlighting and concealed storage across the whole wall.
A wall-hung cabinet with the floor clear beneath — lighter, easier to clean under, and it makes a small room breathe.
The set-top box behind a shutter, the amp on a vent path, the wiring inside the wall. Everything ugly is dealt with at civil stage, so the finished wall is only the part worth looking at.
If we're doing your living room, the cabling is designed before a single tile is laid. Chasing an existing wall afterwards means dust, paint and a few days — trivial now, a real job later.
The unit carries the storage; the panelling and light carry the room. Get the material and the backlight right and the screen stops being the thing you notice first.
Back panel in wood, stone or fluted panel
Screen centred near seated eye level
Bias light behind, cove above, dimmable
Closed base, open display only where it earns it
Send us the wall width, the screen size and how far back the sofa sits — we'll come back with a unit sized to the room and a price.
No cables. Anywhere. I still don't entirely understand where they went.
Anis & Babita — 2 BHK, Electronic City
Visit our Bangalore studio. Walk through real kitchens and wardrobes, meet the designer who'll take your project, and leave with a transparent quote.
Tell us about your home and we'll call within 24 hours.
Prefer to talk it through?
Our Bangalore studio is open 10am – 7pm, all days.